PUMPS

At Torque M.D. we offer sales, rentals and full service on a complete range of torque pumps and associated equipment that are:

  • 10,000 PSI

  • Available in electric/hydraulic, pneumatic/hydraulic operation, 

  • Made in the USA

  • Available in a single-port design for single tool use or a four-port design for running up to 4 tools at once.

The PE55TWP-BS has been the market leading torque wrench pump for over 30 years & is therefore tried & tested.

A simple, light-weight design with a recent upgrade that has created a cost-effective workhorse.

torque pump.PNG

Lower

Life-Cycle Costs

  • Over 100,000 cycles

  • Continuous duty up to 122°F (50°C) ambient

  • Proven design = Proven reliability

  • CAUTION: This system should not be used for lifting applications.

Enhanced Usability

  • Two Speed High Performance pump

  • Retract side internal relief valve protects tool

  • Hand remote

  • Four-tool manifold (-4 models only) allow use of up to four tools simultaneously

  • 4″ calibration capable gauge

  • Use with single or double acting tools

Safety 

  • Easily adjusted pressure regulator (relief) valve

  • 1,500 psi (103 bar) pressure retract relief valve

electric

Maximum Oil Capacity: (vented reservoir)

  • 1.8 Gallons (6.8 L) [to fill line]

  • 1.4 Gallons (5.3 L) [usable]

 

Operating Environment:

  • -13°F to +122°F (-25°C to +50°C)

*When operating near temperature extremes, it is recommended

to use hydraulic oils that are rated for those temperatures.

Refer to service manuals and cooling options)

 

Sound Level

  • 87-92 dBA (maximum)

Pressure:

 

  • 0 – 10,000 psi (0 – 700 bar)

 

Typical Flow

  • 704 in3/min – 56 in3/min ​(11.5 L/min – 0.9 L/min)

Power

  • 1-1/8 hp Universal Motor

  • 110/115V – 50/60 Hz (25 amps)

  • 220/230V – 50/60 Hz (13 amps

air

Maximum Oil Capacity (vented reservoir)

  • 1.8 Gallons (6.8 L) [to fill line]

  • 1.4 Gallons (5.3 L) [usable]

Operating Environment

  • -13°F to +122°F (-25°C to +50°C)

*When operating near temperature extremes, it is recommended to use hydraulic oils that are rated for those temperatures. Refer to service manuals and cooling options)

Sound Level

  • 85-92 dBA (maximum)
     

Pressure

  • 0 – 10,000 psi (0 – 700 bar)

Typical Flow

  • 465 in3/min – 55 in3/min

  • 7.6 L/min – 0.9 L/min)

Air
50 cfm @ 80 psi (1.4 m3/min @ 5.5 bar)
58 cfm @ 90 psi (1.65 m3/min @ 6.2 bar)
67 cfm @ 100 psi (1.89 m3/min @ 6.9 bar)

GET A QUOTE

arrow&v

24-HOUR SERVICE | 985-227-5755

168 Trinity Lane, Unit C Gray, LA 70359

© 2020 by TorqueMD. All rights reserved. Created by Gravois Graphics